|
|
本帖最後由 shafiul99 於 2022-10-15 18:16 編輯
Click Best control system: Bobst | Digital Inspection Table DIT PRINTING Large/Wide Format printers Best roll-to-roll printer > 320 cm: swissQprint | Karibu Best flatbed/hybrid printer < 100 sqm/h: HP | HP Latex R2000 Printer Best flatbed/hybrid printer < 250 sqm/h: Durst | P5,350 Best flatbed/hybrid printer > 250 sqm/h: Agfa | Jeti Tauro H3300 LED Best print & cut solution: Roland DG | TrueVIS VG2 Best Multifunction Printer: Mutoh | ValueJet 1627MH Best roll-to-roll fabric printer > 100 From © 2020 Graphica News All rights reservedUVgel technology in wide format prints on September 26, 2018 Share to FacebookShare to TwitterShare to E-mailShare to PinterestShare to Print The following article was provided exclusively to GraphicaNews by Canon. The good news for professionals in the field of Visual Communication and the production of Graphical Applications is that the demand is constantly increasing.
At the same time, year after year, production capacity is also increasing, with printed materials from wide format Latex, Eco-solvent and UV printers expected to increase from 1 billion square meters to over 1.6 billion square meters by 2020! However, this growing demand for prints typically requires extremely image manipulation service short production times. Research by InfoTrends has shown that today, nearly two-thirds of orders must be delivered in less than 48 hours, with more than 40% of those even being delivered the same day. Growth opportunities are thus offset by these extremely high service expectations, and thus productivity is a key concern for most PSPs (Print Service Providers). The latter have responded to these challenges with continued investment in equipment, often replacing large-format digital printers every two or three years to take advantage of increased production speeds.
The need for increased productivity was also reflected in the recent FESPA (Print Census) survey, where over 50% of investment decisions in a machine were made with a view to increasing productivity. At the same time, print professionals are placing increasing importance on end-to-end workflows increasing efficiency across the entire spectrum of their production process (from the order-taking stage to order management via web-to- print) so as to remove any delays at all stages. in a mature market, the pace of technological progress in wide format digital printing has fatally slowed. One of the main causes of this slowing down of technological progress is due to the basic common feature shared by the 3 prevailing printing technologies (latex, solvent, eco-solvent): while these technologies have many positive features, they require an evaporation process to remove water from the ink and from the printed substrate.
|
|
發表於 2022-10-15 18:14:39
